PRESTIGE SLIM WALL WATER BUTT – 250 LITRE

The 250 classic water butt is an award winning tank. 2025 GLEE New Product of the Year.

The Classic Slim 250l Rainwater Tank can be place directly on the floor, raised on a stand/plinth or wall mounted.

The simple unique design makes it visually discreet and easy to install.

Multiple tanks can be joined together to achieve the desired storage capacity.

This tank can form part of an above ground pumped rainwater harvesting system by incorporating a pump to one of the tank outlets.

This tank incorporates two 4″ access caps to allow backnuts to be fitted for diverters, overflows etc.

There are a number of draw off points to allow flexibility:

• 3 high level (approx 300mm from base)  3/4″ BSP draw off points for the supplied high quality brass tap which can be used with a watering can.
• 2 lower level (approx 150mm from base)  3/4″ BSP draw off points for a pump drawoff.
• 1 No. sump draw off at the base of the tank for tank cleaning

The drawoff points are NOT drilled allowing the customer to drill out the drawoff point to suit the requirement.

The Classic Ultra Slim 250l Rainwater Tank is manufactured in the UK.

Specification:

Height: 1195mm

Width : 995mm

Depth: 250mm

Capacity: 250 Litres

Weight: 22kg

Weight when full: 272kg

Material: MDPE

Included Accessories:

• 5 x 3/4” BSP tank outlet fitting (undrilled, drill to suit with a 10mm drill bit)
• 1 No. 3/4″ brass tap
• 2 No 3/4″ plugs
• 2 No. washers (wall fixings are NOT supplied and should be purchased to suit the substrate eg. solid brick, hollow brick, stone, timber, rendered block )

Notes

The drawoff points are NOT drilled out, allowing the customer to select the drawoff point required. The chosen draw off point should be drilled through with a 10mm drill bit.

This tank requires a fitting gap of ~25mm between the tank and the wall to allow for expansion. The fixing points allow the tank to be secured to a wall or a stable fence.